Category

Caprari BHR Series

Caprari BHR Series Centrifugal Pump

Caprari’s horizontal centrifugal single stage pumps can be coupled with both diesel engines and electric motors with 6 and 4 poles. These pumps with the ability to deliver substantial flows are suited to application in irrigation, fish farming, and industry in general. Pumps conform to 2009/125/EC Directive (EcoDesign –ErP).
Continue Reading
Caprari MEC-MR-Pump

Caprari MEC-MR Series Horizontal Multistage Pump

Caprari’s MEC MR range of horizontal centrifugal multistage pumps can be coupled with both combustion engines and 2 or 4 pole electric motors. Both packing and mechanical seals are available. These pumps are ideal for application in water supply, general industry, irrigation, firefighting and for any clean water raising requirements. 
Continue Reading
Caprari NC Pump

Caprari NC Series Standardised Horizontal Centrifugal Pump

Caprari’s NC range of pumps are horizontal centrifugal pumps manufactured to conform to DIN 24255/EN 733 standards. Variations are available with mechanical seals and cast iron or stainless-steel impellers. These pumps are ideal for application in heating and air-conditioning systems, refrigeration plants, water supply, irrigation, firefighting and general industry. Machines conform to 2009/125/EC Directive (EcoDesign – ErP). 
Continue Reading
Ebara 3LS Pump

Ebara 3LS & 3LS4 Series End Suction Pump

Ebara’s 3LS & 3LS4 range of end suction pumps feature Ebara’s unique one-piece volute casing. All the hydraulic and wetted components are manufactured in 316L stainless steel, and fitted standard with SiC/SiC/Viton mechanical seal.Standard IEC motorsareused, allowing for single phase, special enclosure, or specific brand motors to be fitted.
Continue Reading
Ebara 3M Pump

Ebara 3M & 3M4 End Suction Pump

Both the 3M and 3M4 range of Ebara’s end suction pumps are manufactured with Ebara’s unique one-piece volute casing. All wetted and hydraulic components are made from 304 stainless steel to negate corrosion. These pumps feature a compact and economical close coupled design, utilising an extended shaft motor. High temperature versions of these pumps are...
Continue Reading
Ebara CDX Pump

Ebara CDX Single Impeller Pump

Ebara’s CDX range of single impeller centrifugal pumps are manufactured almost entirely from 304 stainless steel, giving optimal corrosion resistant performance. These pumps also feature Ebara’s single piece volute manufactured using a unique plasma stamping process.  These pumps can produce heads between 12 and 41 metres and flow rates between 20 and 250 litres per minute.
Continue Reading
Ebara DWO pump

Ebara DWO Open Impeller Centrifugal Pumps

Ebara’s DWO range of centrifugal pumps feature an open impeller, making them ideal for transporting water containing suspended soft solids. They are suitable for handling spherical solids up to 19 millimetres in diameter. The hydraulic element is manufactured from stainless steel AISI 304.
Continue Reading
Inoxpa HYGINOX-SE

Inoxpa HYGINOX SE Centrifugal Pump

Inoxpa’s HYGINOX SE range of centrifugal pumps are a cost-efficient sanitary pump ideal for application in dairy, beverage, pharmaceuticals and cosmetics industries. The range is made of a cold-formed stainless-steel casing, stainless steel open impeller (investment casting), mechanical seal, pump cover, lantern and shaft, connected to the motor shaft by mechanical compression. The motor complies with the...
Continue Reading
Inoxpa RV Centrifugal Pump

Inoxpa RV Helicoidal Impeller Pump

Inoxpa’s RV range are centrifugal pumps with helicoidal impellers. This range is an ideal solution for the transfer of liquids containing solid particles or medium viscosity products that cannot be pumped using ordinary centrifugal pumps. Due to the impellers helicoidal shape product transfer is gentle and without clogging. It is suitable for applications including the transfer...
Continue Reading

Pedrollo 3-5CR Series

The 3-5CR Series are reliable clean water pressure pumps, suitable for use across domestic and light commercial applications.  The smaller CR series pumps would typically be used for applications such as water supply to homes and irrigation of gardens.  The larger CR series pumps would typically be used for applications such as water supply to...
Continue Reading

Pedrollo 4-5CR Series

The 4-5CR Series pumps are reliable clean water pressure pumps, suitable for use across large domestic and light commercial applications.  These pumps would typically be used for applications such as water supply to large homes, multi-residential developments and commercial buildings. These pumps are renowned for being exceptionally quiet. Each pump model includes an EASYPRESS electronic...
Continue Reading

Pedrollo JCRm 1A-EP1

The JCRm 1A-EP1 is a reliable clean water pressure pump, suitable for use in domestic applications such as water supply to homes and irrigation of gardens.  The pump is designed to suck water even in the presence of air mixed with the pumped liquid. The pump includes an EASYPRESS electronic controller, which automatically starts and...
Continue Reading
ISO Pro_Long Coupled

Southern Cross ISO End Suction Pumps

Southern Cross’ range of ISO end-suction pumps features three models all designed for efficient and reliable transfer of water for general use up to heavy-duty industrial applications and irrigation. The range is Australian designed and comes with a wide range of options including material choice and optional extras. Each pump in this range comes with...
Continue Reading