Category

Caprari BHR Series

Caprari BHR Series Centrifugal Pump

Caprari’s horizontal centrifugal single stage pumps can be coupled with both diesel engines and electric motors with 6 and 4 poles. These pumps with the ability to deliver substantial flows are suited to application in irrigation, fish farming, and industry in general. Pumps conform to 2009/125/EC Directive (EcoDesign –ErP).
Continue Reading
Caprari E Series Submersibles

Caprari E Series Submersible and Borehole Pump

The Caprari E series range of submersible pumps is an impressive line-up with many versions, configurations and materials of construction available. Caprari is an end to end manufacturer and can control the quality of the pump through the whole manufacturing cycle from casting to building the electric motors. The E series range includes a full...
Continue Reading
Caprari HV Series

Caprari HV Series Vertical Multistage Pump

Caprari’s vertical multistage centrifugal surface pumps are efficient and low noise producing. They are ideal for heavy duty applications in water supply systems, washing, firefighting, air-conditioning and cooling systems, in irrigation and for general booster systems. Machines conform to 2009/125/EC Directive. 
Continue Reading
Caprari MEC-MR-Pump

Caprari MEC-MR Series Horizontal Multistage Pump

Caprari’s MEC MR range of horizontal centrifugal multistage pumps can be coupled with both combustion engines and 2 or 4 pole electric motors. Both packing and mechanical seals are available. These pumps are ideal for application in water supply, general industry, irrigation, firefighting and for any clean water raising requirements. 
Continue Reading
Caprari NC Pump

Caprari NC Series Standardised Horizontal Centrifugal Pump

Caprari’s NC range of pumps are horizontal centrifugal pumps manufactured to conform to DIN 24255/EN 733 standards. Variations are available with mechanical seals and cast iron or stainless-steel impellers. These pumps are ideal for application in heating and air-conditioning systems, refrigeration plants, water supply, irrigation, firefighting and general industry. Machines conform to 2009/125/EC Directive (EcoDesign – ErP). 
Continue Reading
Caprari PM Series

Caprari PM Series Horizontal Multistage Pump

Caprari’s Centrifugal multistage pumps are suited to high pressure applications, constructed from nodular, engineering cast iron suitable to 100 bar and bronze. Double support is provided by large bearings and a hydraulic pressure balancing device. Versions with adjustable packing or a mechanical seal are available. These pumps produce high performance and hydraulic efficiency. 
Continue Reading
Ebara CDX Pump

Ebara CDX Single Impeller Pump

Ebara’s CDX range of single impeller centrifugal pumps are manufactured almost entirely from 304 stainless steel, giving optimal corrosion resistant performance. These pumps also feature Ebara’s single piece volute manufactured using a unique plasma stamping process.  These pumps can produce heads between 12 and 41 metres and flow rates between 20 and 250 litres per minute.
Continue Reading
Ebara EVMS Pump

Ebara EVMS Vertical Multistage Pump

Ebara’s EVMS range of vertical multistage pumps are manufactured to a high standard of quality and achieve reliable operating performance. Ebara has rethought the hydraulic design used in multistage pumps, utilising the latest in computational fluid dynamics and design, followed by rigorous testing. Ebara has developed a unique and optimised impeller, its shape maintains high efficiencies and very significantly reduces the axial...
Continue Reading
Flygt Grinder Pump

Flygt Sewage Grinder Pump

A grinder pump cuts down solids to fine particles, producing a slurry suitable to be conveyed through small-diameter pipes. The most common application of grinder pumps is in pressurised sewage systems where topography, surface conditions etc. are too challenging for conventional gravity systems. Flygt’s M-3000 series submersible, centrifugal pumps are ideal for pumping wastewater in...
Continue Reading
Inoxpa HYGINOX-SE

Inoxpa HYGINOX SE Centrifugal Pump

Inoxpa’s HYGINOX SE range of centrifugal pumps are a cost-efficient sanitary pump ideal for application in dairy, beverage, pharmaceuticals and cosmetics industries. The range is made of a cold-formed stainless-steel casing, stainless steel open impeller (investment casting), mechanical seal, pump cover, lantern and shaft, connected to the motor shaft by mechanical compression. The motor complies with the...
Continue Reading
JWC 7-Shred Grinder

JWC 7-SHRED Industrial Dry Grinder

JWC’s 7-SHRED industrial grinder is well suited to difficult grinding applications. It has been specifically designed for applications requiring critical size reduction in a variety of industries. This large unit has the flexibility of customisation to suit individual and specific needs such as specialised cutters or working without additional spray or wash water. Its robust...
Continue Reading
Pedrollo UP-GE Series Pump

Pedrollo UP Series

The Pedrollo UP Series pumps are submersible clean water pressure pumps, suitable for use in domestic, light commercial and agricultural applications such as water supply to homes, buildings and irrigation of gardens.  These pumps are highly recommended for applications where water is being pumped from a below-ground water tank. These pumps can be supplied as...
Continue Reading

Remko Self-Priming Pump

Remko offer two series of self-priming pumps; the RT series and RTH series which are available in stainless steel, cast iron and CD4MCu construction in a range of sizes. The Remko RT Series are best suited where trash and solids are present. Ideal for stormwater, waste water, raw sewage to construction dewatering. The RTH Series are best suited for high pressure...
Continue Reading
Southern Cross Vertical Turbine Pump

Southern Cross Everflow Line Shaft Turbine Pumps

Southern Cross’ Everflow lineshaft turbine pumps are Australian designed pumps featuring an extensive range of options to suit a broad range of demanding applications. They are available in sizes of 150mm and upwards. This range is capable of handling flow rates up to 500 litres per second and heads of up to 600 metres.
Continue Reading
ISO Pro_Long Coupled

Southern Cross ISO End Suction Pumps

Southern Cross’ range of ISO end-suction pumps features three models all designed for efficient and reliable transfer of water for general use up to heavy-duty industrial applications and irrigation. The range is Australian designed and comes with a wide range of options including material choice and optional extras. Each pump in this range comes with...
Continue Reading
Sulzer AS Pump

Sulzer AS Series Submersible Wastewater Pumps

The AS 0530-0841 range features robust, reliable submersible pumps from 1 to 3 kW for pumping wastewater and sewage from buildings and sites in both domestic and commercial areas. The pumps have water pressure-tight, encapsulated, fully flood-proof motors in standard and explosion-proof versions. 
Continue Reading
1 2